Time for 17°C


Coming soon: New Danfoss Eco™
The easy way to smart radiator heating
A stand-alone, simple to install and
easy to use radiator thermostat
RRP from €39,9
Learn more
Smart Heating
Danfoss Link™ ensures that the temperature stays just the way you like it. Your home will be warm and cozy when you get home earlier than expected. Just enjoy the ultimate comfort experience.






Your everyday life has a rhythm,
your indoor climate should, too.


Comfort mode: On

Saving mode: On

Vacation mode: On
Calculate your savings
After

Add Connect™
Savings
What other people say about LINK?







Smart heating by Danfoss
Danfoss Link™ family

Danfoss Link™ Central Controller
Danfoss Link™ Central Controller is the centrally placed main unit for controlling of indoor climate throughout the house.
Key features:
• Intelligent and easy-to-operate color touchscreen
• Schedule holidays with the timer feature: activate holiday mode as you leave
• Cost-effective energy consumption
• Wi-Fi to connect to home network and remote access through the Danfoss Link™ App
• Control heating from one central point
• Comfort mode
• Frost protection
• Integrated help function
• Personalized settings
• Quick/moderate heating regulation functions
The Danfoss Link™ Central Controller can be used in detached single-family homes of less than 300 m² with a maximum of 30 Connect Thermostats per Danfoss Link™ Central Controller.

Danfoss Link™ Room Sensor
Danfoss Link™ Room Sensor is an electronic sensor for measuring room temperature.
Key features:
• High flexibility – free positioning and easy repositioning of room thermostats
• Backlit display (during operation)
• Built-in sensor for measuring room temperature
• Display of set and actual temperature
• Timeless modern design
• 2 x AA batteries
• Battery life up to 2 years
• Warnings: ‘low battery’ and ‘no signal’

Connect Thermostat
Connect Thermostats are electronic radiator thermostats and are used in combination with Danfoss Link™ Central Controller.
Compatibility
Runs on two AA alkaline batteries. Fits standard radiator valves RA, RAV, RAVL, RTD (Danfoss), M30 (TA, Heimeier, Honeywell, Oventrop) and M28 (MMA, Herz, Orkli, Comap).
Key features:
• Frost protection
• ‘Valve exercise’ function
• PID control
• Battery lifetime up to two years
• Warnings: ‘low battery’ and ‘no signal’
• Variable setback in steps of 0.5°C
• Max./min. limitation
• Child lock
• ‘Open-window’ detection
• Backlit display
Connect Thermostat is the world’s first electronic radiator thermostat to achieve eu.bac certification.

Danfoss Link™ Floor Thermostat
Key features:
• On/off switch
• Wireless connection to the Danfoss Link™ Central Controller
• Floor sensor
• 15A switching load, 4A inductive load

Danfoss Link™ Hydronic Controller
The Danfoss Link™ Hydronic Controller controls hydronic floor heating systems. The system offers a wide range of extended functionalities for optimal comfort and energy saving with individual room temperature control.
Key features:
• Wireless two-way communication 868 MHz
• 24V short-circuit protected outputs with LED
• Actuator outputs for various cable connections
• Easy wiring
• Control PWM (pulse width modulation)
• Automatic self-diagnostic function with error message
• Switching relay for pump and boiler control
• Input (on/off) for heating/cooling and for presence/absence mode

Danfoss Link™ Repeater Unit
The Repeater Unit is used for extending the wireless transmission range between the Central Controller, Room Sensors and other connected components in Danfoss Link™.
Key features:
• Easy wireless assignment to Central Controller
• Supplied by 230V
• Up to 3 Repeater Units installed in a chain between the relevant radiator thermostat, room sensor and the Central Controller
You typically save 5% energy every time you reduce the temperature by 1°C
Find out the cost for equipping your home with Danfoss Link™ smart heating
Danfoss recommends these products





Starting from
450 eur* *Final calculation will be done by our certified installer.
Find the nearest installer
Our partners are ready to assist you.
Choose your country to find InstallerFollow the Quick start guide for setting up Danfoss Link™ – our online guide is available on your smartphone or tablet and guides you through the entire process.
Upgrade Central Controller via Wi-Fi
If your Danfoss Link™ Central Controller is connected to Wi-Fi, it is set to do software updates automatically.
The latest software is version 4.2.1061
If your Danfoss Link™ Central Controller does not have Wi-Fi, you can update the software via USB / SD card, depending on the specific Central Controller.
Upgrade Central Controller with USB stick

First follow the link to identify, if your Central Controller with USB stick is enabled for Wi-Fi or not.
Download the software to a USB by clicking the relevant link.
Then go to your Central Controller and do the following:
1. Insert USB
2. Press the screen view Start mode
3. Select “House control”
4.Select “Settings”
5. Select “Wi-Fi and apps”
6. Select “App options”
7. Select “Software update”
8. Select “Update via USB”
9. Select “Update software now”
Update Central Controller with MiniSD Card

First download the latest software to a MiniSD Card by clicking the link.
Then go to your central controller and do the following:
1. Insert the MiniSD Card
2. Remove the front cover and press the SETUP pin for 3 seconds to enter the service area
3. Select “Software”
4. Select “Software Upgrade”
5. Select “Start Upgrade”
6. Select “Upgrade Software Now”
Note: Central Controllers from before 2010 are sometimes using software version 1.x.x. In that case, you need to update your Central Controller to version 2.1.35 before updating to the latest software.
Customize your user manual
With a customized user manual you can find instructions and advice for finding the settings that fit your exact needs.
Please select the heating devices you have bought and connected to your Danfoss Link™ and get a customized user manual by clicking “create user manual”.
Demount old thermostat
If you have an old thermostat on your radiator, you need to dismount your old thermostats, before you can install Connect Thermostat. In the video, we illustrate how to do it – depending on which thermostat you currently have.
Mount new thermostat and adapter
First, you need to identify which adapter is right for your radiator. Danfoss provides different adapters for different radiator valve types. Use the adapter selection guide by placing the different dimensions onto the valve to identify which adapter fits your valve.
The adapters supplied cover more than 90 per cent of all top mounted valves, both Danfoss and other brands. If none of the adapters fit onto your valve, it may be because your valve is old. In this case, we recommend that you buy a new valve.
Second, fit the correct adapter onto the valve. Insert batteries into your new Connect Thermostat and screw the thermostat onto the adapter and tighten. Leave mounting mode.
Please watch the how-to videos for a full explanation.
Now you are ready to create room and add devices on your Danfoss Link™ Central Controller. Please follow linkguide.danfoss.com to do this.
Adding devices
You can add devices to your Danfoss Link™ by following the Quick start guide on linkguide.danfoss.com. Remember to keep track of the devices you have added to Danfoss Link™, so you know in which room to mount the device.
Note: If your Central Controller says that the device was not successfully added, please reset the device (watch video below).
Moving or removing devices
If you wish to remove a device or move it to another room, reset the device you wish to move or remove (watch reset device video).
The device is now ready to be re-installed. Please follow the Quick start guide on linkguide.danfoss.com.
Power outage on Danfoss Link™ Central Controller
If there is a power outage, the Danfoss Link™ Central Controller will turn on, once it gets power again and will connect to your installed devices.
If the Central Controller does not get power again
- Connect Thermostat will continue on the temperature they were at when the power outage happened
- the Room Sensor will go into frost protection mode
Connect Thermostat or Room Sensor runs out of battery
When Connect Thermostat or Room Sensor is low on a battery, a battery icon will shown in the display and the Central Controller will give you an error message. If a Connect Thermostat or Room Sensors runs out of battery, they will go into frost protection mode.
Connect Thermostats and Room Sensors use 2 x AA non-rechargeable batteries each.
The freer passage the radio signal from the Central Controller has, the farther it can reach. House walls, metal objects, special constructions and other obstacles weaken the signal. Your Central Controller will give an alarm if it cannot reach a device for more than 1.5 hours.
If there are obstacles between your devices, you may need to install a Repeater Unit to extend the signal. Follow linkguide.danfoss.com to install the device. If necessary, you can extend the extended signal by adding another Repeater Unit as illustrated below. You only need one Central Controller for your home.
It can measure and control the temperature at a specific spot in your home.
If you place the Room Sensor close to your couch or away from a window, you ensure your desired temperature at this spot, because you optimize the actual temperature measurement in the room.
We recommend adding a Room Sensor in rooms with multiple radiators, because the Room Sensor balances the temperature across radiators based on the room temperature.
If your radiator thermostat is covered, e.g. by furniture, the Room Sensor will ensure your desired temperature in the room.
Add the Room Sensor to your Danfoss Link™ Central Controller in the same room as the Connect Thermostat you want the Room Sensor to be connected to.
Energy savings are achieved through a reduction in room temperature.
As a general rule, you can save 5% of energy consumption for every degree you lower the temperature at night. We recommend, you lower the temperature 3-4 °C at night and during working hours, e.g. from 21°C to 17°C. Also, activate vacation mode when you are on holiday.
When using Connect Thermostat, the average European saving potential is up to 30% on your heat consumption. Read more here.
The older your thermostats are when exchanging them, the greater your energy savings will be.
Connect Thermostat was the first electronic thermostat ever to achieve the prestigious AA energy certificate from eu.bac.
Please go to our Danfoss Link™ App Helpdesk and get the assistance you need.
To ensure that the radiator thermostat can reach the set temperature quickly, we recommend a difference between Away/Asleep mode and At Home mode at max. 4 ˚C.
Danfoss Link™ offers a precise and energy efficient heating regulation by adapting itself to the heating system. This takes approximately one week after installation. Therefore, during the first week you can experience fluctuations as the thermostats are learning when to start heating to reach the specific temperature at the specific time (adaptive learning). After this period, you can enjoy the perfect temperature in your home whenever you want it.
Below is an illustration of which Danfoss Link™ products are room devices and which are service devices.
The Danfoss Link™ Central Controller works in all residential units up to 300 m² with a maximum of 50 units per Central Controller (1 Central Controller + 49 units).
You can connect up to 50 devices in total to Danfoss Link™ Central Controller and thereof max. 30 Connect Thermostat to Danfoss Link™. Danfoss Link™ controls up to 10 devices in one room.
Maximum number of devices you can add to Danfoss Link™:
Yes, if you have the Wi-Fi version of Danfoss Link™ Central Controller. You can download the app from either App Store or Google Play.
No. eco is a stand-alone product. You need to use Connect Thermostat for Danfoss Link™.
Danfoss ensures that all the devices in your home and the cloud service we provide to your smartphone are secure at all times. The Danfoss Link™ App is developed on a Home Banking platform and so the pairing of the Danfoss Link™ App to the Danfoss Link™ Central Controller is fully secure.